FAHM Co. manufacture a wide range of diaphragm seals for hygienic and chemical applications

 - - - - - - - - - +-----
X
010
Process Connection Style
 
 
  Prod. time (days)
Remote Bolted Seal, Assembled Product accuracy after Sealed & Calibration in full Temperature Range better than0
X
020
Process Connection
 
 
  Prod. time (days)
Flat Flange Type0
Sandwich Seal Type0
Raise Flange Type0
X
030
Process Connection Flange Size
 
 
  Prod. time (days)
xxx: Size of Flange for DN Flanges0
yyy: Size of Flange for ANSI Flanges0
X
040
Process Connection Pressure Rating
 
 
  Prod. time (days)
xxx: Pressure Rating for DN Flanges0
yyy: Class Rating for ANSI Flanges0
X
050
Facing Type
 
 
  Prod. time (days)
Flat Face0
Raised Face0
Ring Type Joint0
X
060
Upper/ Lower Housing Materials
 
 
  Prod. time (days)
Stainless Steel 316L0
Special Version0
X
070
Diaphragm Material
 
 
 Diaghragm (wetted)Prod. time (days)
Stainless Steel 316L0
Titanium GR-30
Alloy C-276 (Hastelloy)0
Tantalum (Pure)0
Alloy-400 (Monel)0
Alloy-625 (Inconel)0
Stainless Steel 316L Coated with PTFE0
X
080
Diaphragm Size
 
 
 ASME B16.5EN 1092-1DiameterProd. time (days)
2inDN5059mm0
3inDN8089mm0
5inDN150135mm0
X
090
Filling Liquid
 
 
  Prod. time (days)
Silicone Oil DC 200 (Operating Temperature: -20 to 180 °C)0
Silicone Oil DC 704 (Operating Temperature: -10 to 300 °C)0
X
100
Capillary / Direct Length (cm)
 
 
  Prod. time (days)
Direct Length: xxx cm (Without Capillary, Standard 7 cm)0
Capillary Length: yyy cm0
X
200
Options
 
 
  Prod. time (days)
Heat Sink Interface0
Forged Flange0
X
210
Flushing Ring
 
 
  Prod. time (days)
Flushing Ring with 1 hole, 1/4”-18 NPTF0
Flushing Ring with 1 hole, 1/2”-14 NPTF0
Flushing Ring with 2 holes, 1/4”-18 NPTF0
Flushing Ring with 2 holes, 1/2”-14 NPTF0
X
220
Pipe Outside Diameter (D)
 
 
  Prod. time (days)
Default = 60 mm0
X
230
Pipe Inside Diameter (d)
 
 
  Prod. time (days)
Default = 40 mm0
X
240
Pipe Length (L)
 
 
  Prod. time (days)
Default = 50 mm0
X
250
NACE Certificate
 
 
  Prod. time (days)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials0